Fluoropolymer (PTFE) Heaters
Product Features and Benefits:
SUPERIOR CHEMICAL RESISTANCE: Inert to most aqueous acid, alkaline, anodizing and pickling solutions up to 212°F (100c).
RUGGED CONSTRUCTION: Heavy wall fluoropolymer (PTFE) covered stainless steel element reduces permeation and eliminates the need for gas purge systems. Guaranteed 100% pinhole free.
OUTSTANDING PERFORMANCE: Low watt density design (10 watts/square inch, 1.5w/cm2) for long service life.
CORROSION RESISTANT HEAD: Vapor tight, flame retardant polypropylene terminal enclosure with 3-foot (.9m) flexible PVC liquid tight conduit.
SAFETY FEATURES:
|
•
|
Grounded internal metal element.
|
|
•
|
Thermal protector built in. Replaceable P1 fuse standard for solutions up to 190 (88).
|
|
•
|
Non-floating construction.
|
CERTIFICATIONS: UL (1-6 kW), CSA, and CE.
SIZES: 500 watts to 9,000 watts.
VOLTAGES: 120, 240 or 480 volts. 208, 380, 415, 600 and other voltages available. Single phase only.
OPTIONS AVAILABLE(consult factory):
|
•
|
Replaceable thermal protectors:
• P4: for solutions from 190°F (88℃) to 220°F (104℃).
|
|
•
|
Resettable thermal protectors:
• P2: bi-metal switch for solutions up to 190°F (88℃).
• P8: type-J thermocouple for solutions from 190°F (88℃ to 210°F (99℃).
• P3: type-J thermocouple for solutions from 210°F (99℃) to 250°F (121℃).
|
|
•
|
Longer vertical lengths (cold zones).
|
|
•
|
Polypropylene guards: recommended for applications up to 180°F (82℃).
|
|
•
|
Fluoropolymer (PTFE) guards: recommended for chromic acid or solutions over 180°F (82℃).
|
|
•
|
Special configurations.
|
|
•
|
Longer wire and conduit lengths.
|
|
•
|
Flexible continuous fluoropolymer leads (P3 protector only).
|
|
•
|
Lower watt densities for highly viscous solutions and technical acids.
|
|
•
|
Temperature and level controls sized to match the heater.
|
